Manual

ControlLogix Data Highway Plus-Remote I/O Communication Interface Module 13
Publication
1756-IN003D-EN-P - July 2008
Connect the Programming Terminal and DH+ or Remote I/O Network
1. Connect the programming terminal to the 8-pin mini DIN connector.
2. Connect the DH+ or Remote I/O network to the channel A or B
connector as appropriate.
Apply Chassis Power
WARNING
For hazardous locations, use the following cable for the programming
terminal
connection:
• Supplier: Huan Yu
• Part Number: GCMD08P050062000
POWER
POWER
12
43239
ON
POWER
OFF
ON
POWER
OFF
43240