Installation Instructions Owner manual

28 ControlLogix-XT ControlNet Interface Module
Publication
1756-IN634A-EN-P - April 2009
Any Keeper:
Unconfigured
The network configuration
data maintained in flash
memory by the keeper object
has been erased or corrupted.
Perform any of these steps:
· Use RSNetWorx software to
download or update the
keeper object in the module.
· See Reset the Module to
the Original Factory
Settings, on page 12
.
Keeper:
Unconfigured
(data format
changed)
The network configuration
data maintained in
flash
memory by the keeper object
is in a format incompatible
with the current revision of
firmware.
Perform any of these steps:
· Use RSNetWorx software to
download or update the
keeper object in the module.
· See Reset the Module to
the Original Factory
Settings, on page 12
.
Keeper:
Unconfigured
(slot
changed)
After the keeper object’s
network-conf
iguration data
was downloaded, the module
was moved to a different spot
in the chassis.
Perform any of these steps:
· Return the module to the
proper slot.
· Use RSNetWorx software to
download or update the
keeper object in the module.
· See Reset the Module to
the Original Factory
Settings, on page 12
.
Keeper:
Unconfigured
(net address
changed)
The network address switches
on the module have
been
changed since the keeper
object’s network-configuration
data was downloaded.
Perform any of these steps:
· Return the network address
switches to their original
setting.
· Use RSNetWorx software to
download or update the
keeper object in the module.
· See Reset the Module to
the Original Factory
Settings, on page 12
.
OK
Indicator
Display Cause Recommended Action