Installation Instructions Owner manual

ControlLogix® Battery Module 19
Publication
1756-IN576B-EN-P - September 2003
Check the BAT LED
1. Turn on the chassis power.
2. Is the BAT LED off?
3. Ch
eck that the battery module is correctly connected to the controller.
4. Ch
eck that the battery assembly is correctly connected to the battery
module.
5. If th
e BAT LED remains on, install another battery assembly (catalog
# 1756-BATA).
6. I
f the BAT LED remains on after you complete step 5, contact your
Rockwell Automation representative or local distributor.
If: Then:
Yes The battery module is correctly installed.
No Go to step 3.
31303-M
BAT LED