Installation Instructions Owner manual

12 ControlLogix® Battery Module
Publication
1756-IN576B-EN-P - September 2003
Mount the Battery Module
1. To make an electrical connection between the battery module and the
enclosure, scrape the paint off the panel of the enclosure.
2. In
stall the hardware for the top mounting tabs.
3. Slide
the top tabs of the battery module over the screws.
31301-M
M4 or M5 (#10 or #12)
phillips screw, flat washer,
and split lock-washer
31302-M
4. Tighten the screws.