Installation Instructions Owner manual

ControlLogix® Battery Module 11
Publication
1756-IN576B-EN-P - September 2003
Mount the Battery Module Directly to a Panel
To mount the battery module directly to a panel:
• Drill the Mounting Holes
• Mount the Battery Module
Drill the Mounting Holes
1. Are you installing the battery module above existing components?
2. On
the panel of the enclosure, mark the holes for the mounting tabs
of the battery module. Use the template on page 25.
3. D
rill the holes for the mounting tabs.
If: Then:
Yes Protect the existing components from metal chips that may fall as
you
drill the mounting holes.
No Go to step 2.
31301-M