Instruction Manual

244 Publication 1753-UM001C-EN-P - March 2010
Chapter 19 Use GuardPLC Controller as an Adapter
5. Save and download your application.
These steps are described in more detail beginning on page 244
.
For more information on PanelView Standard terminals and using
PanelBuilder32 software, refer to the following:
• PanelView Standard Operator Terminals User Manual,
publication 2711-UM014
.
• PanelBuilder32 Application Development Software for
PanelView Standard Terminals Quick Start, publication
2711-QS003
.
Create an EtherNet/IP Application
Follow these steps to create a new EtherNet/IP application in
PanelBuilder32 software.
1. Select Create New Application from the PanelBuilder32 start-up
screen and click OK.
2. Enter a name for your application.
3. Select your PanelView terminal and EtherNet protocol.
4. Click OK.