Instruction Manual

240 Publication 1753-UM001C-EN-P - March 2010
Chapter 19 Use GuardPLC Controller as an Adapter
The MSG control block appears in the project tree under Data
Files.
2. Insert a MSG instruction rung and assign it to a MSG instruction
control block.
3. For an SLC 5/05 controller, edit the instruction parameters in the
as described below.
4. Double-click Setup Screen in the MSG instruction to configure
the MSG instruction.
Parameter Setting
Read/Write Choose either Read or Write.
Target Device PLC-5
Local/Remote Local
Control Block Enter an integer file with at least 93
elements.
Control Block Length 93 (This is automatically entered by
the programming software.)
PLC-5 Message Control Block
PLC-5 Controller
SLC 5/05 Controller