Instruction Manual

18 Publication 1753-UM001C-EN-P - March 2010
Preface Preface
Resource Description
Using RSLogix Guard PLUS! Software with GuardPLC
Controllers Programming Manual, publication 1753-PM001
Provides procedural information for programming GuardPLC Controller
Systems Using RSLogix Guard PLUS! Programming Software
GuardPLC Controller Systems Safety Reference Manual,
publication 1753-RM002
Contains in-depth information on the safety concept of GuardPLC
controller systems, including the DeviceNet Safety Scanner for GuardPLC
Controller.
DeviceNet Safety Scanner for GuardPLC Controllers User
Manual, publication 1753-UM002
Provides information on installing, configuring, and operating a DeviceNet
Safety Scanner in a GuardPLC application
DeviceNet Safety I/O User Manual, publication
1791DS-UM001
Provides information on operating 1791DS DeviceNet Safety I/O Modules
GuardPLC Certified Function Blocks Safety Reference Manual,
publication 1753-RM001
Provides information on using Certified Function Blocks in your GuardPLC
safety application
EtherNet/IP Performance and Application Guide, publication
ENET-AP001
Information on EtherNet/IP protocol
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
In-depth information on grounding and wiring Allen-Bradley
programmable controllers
Application Considerations for Solid-State Controls,
publication SGI-1.1
A description of important differences between solid-state programmable
controller products and hard-wired electromechanical devices
National Electrical Code - Published by the National Fire
Protection Association of Boston, MA.
An article on wire sizes and types for grounding electrical equipment