Instruction Manual

Publication 1753-UM001C-EN-P - March 2010 125
Use the Control Panel to Monitor Status Chapter 14
Safety Parameters Tab
This field Displays
CPU configuration CRC Cyclic redundancy check (CRC) option for the configuration in the CPU (in hexadecimal
notation).
This identifies the configuration loaded in the controller.
System ID The system ID.
Safety Time [ms] The safety time in milliseconds.
Watchdog Time [ms] The watchdog time in milliseconds.
Main Enable Whether controller switches can be changed while the controller is executing.
Autostart Whether the controller automatically starts up after restarting the controller or applying
power to the controller.
Start/Restart allowed Whether you can start a controller manually.
Loading allowed Whether you can load new configuration information to the controller.
Test Mode allowed Whether you can freeze the routine.
Forcing allowed Whether you can force tags.
Stop on Force Timeout Whether to stop executing the routine when the force time expires.