Instruction Manual

100 Publication 1753-UM001C-EN-P - March 2010
Chapter 10 Wire the 1753-OW8 Relay Output Module
The output contacts are connected in pairs via terminal connectors
(numbered terminals). The terminal pins on the front plate of the
module have the same numbering sequence to help prevent
miswiring.
Example: Connecting Actuators to the Outputs
Voltage Supply
Considerations
For the connection of higher voltages (110/220V AC) besides SELV
and PELV (24V DC), suitable cables must be used with double or
reinforced insulation.
7 DO4 Contact 4, terminal A
8 Contact 4, terminal B
9 DO5 Contact 5, terminal A
10 Contact 5, terminal B
11 DO6 Contact 6, terminal A
12 Contact 6, terminal B
13 DO7 Contact 7, terminal A
14 Contact 7, terminal B
15 DO8 Contact 8, terminal A
16 Contact 8, terminal B
Terminal Number Designation Relay Output
DO 1
DO 2
12 34