Software Owner's manual

Publication 1753-IN006C-EN-P - November 2005
Installation Instructions
RSLogix Guard PLUS! Programming Software
Catalog Numbers 1753-PCS-PAR and 1753-PCS-USB
Before You Begin
1. Make sure your personal computer meets the system requirements below.
2. If you already have version 3.5 or later installed, you must uninstall it before
installing the latest version.
See Uninstall RSLogix Guard PLUS! Software on page 2.
3. If you are installing RSLogix Guard PLUS! software for the first time, you
must install your hardlock.
See Install Your Hardlock on page 3.
Requirements Minimum Recommended
Personal Computer Pentium III, 500 MHz
Pentium
IV, 1.2 GHz
(1)
(1) Turn off hyperthreading before installing RSLogix Guard PLUS! software, version 4.0 or later.
Operating System Windows NT/2000 Windows NT/2000/XP
RAM 256 MB 512 MB
Free Hard Disk Space at least 150 MB plus space for user
programs
at least 200 MB plus space for user
programs
Resolution 1024 x 768 1280 x 1024 true color

Summary of content (8 pages)