Instruction Manual

GuardPLC 1800 Controllers 13

Rockwell Automation Publication 1753-IN002C-EN-P - June 2010

Digital Output Terminals

Terminals accommodate wires up to 1.5 mm

(16 AWG). See the terminal torque specifications

on page 21. Digital outputs are connected to these terminals.

For connection of a load, the reference pole L- of the concerned channel group must be used

(2-pole connection). Although L- at terminals 1 and 6, 7 and 12 is connected internally to L- on

he power supply input, it is strictly recommended to use 1 and 6 for outputs 1…4 only and 7 and

12 for outputs 5…8 only. EMC testing was performed in this manner.

Terminal Number Designation Function Current

1 L- Reference pole —

2 1 Digital output 1 0.5 A

3 2 Digital output 2 0.5 A

4 3 Digital output 3 0.5 A

5 4 Digital output 4 (for increased load) 2.0 A

6 5 Digital output 5 0.5 A

7 6 Digital output 6 0.5 A

8 7 Digital output 7 0.5 A

9 8 Digital output 8 (for increased load) 2.0 A

10 L- Reference pole —

123456

1234

1L- L-DO 2

(2A)(2A)

345 678

78910

10789