Safety Scanner for GuardPLC Controllers User Manual

Publication 1753-UM002A-EN-P - July 2005
Index 5
N#xx 10-3
no network power 10-3
RUN 10-2
S#ee 10-4
status code
descriptions
10-4
general status error codes 10-5
safety connections 10-4
standard connections 10-4
status codes
extended error code
10-7
strobe messages 1-2
strobed
definition
G-3
system ID (SRS) 6-2
system reaction time
definition
G-3
T
target connections file 1-5, 7-2
definition G-3
terminology
used throughout manual
P-3
timeout multiplier 5-5
definition G-3
timing parameters 8-5
transmit retries 5-7, 5-8
U
unique node identifier 4-1
unknown device
icon
9-2
update signals
automatically
7-2–7-3
upload and compare
Safety Device Verification Wizard
9-4
use data signals 1-3
V
verification failure report 9-5
verification reports
Safety Device Verification Wizard
9-5
verify
select devices
9-3
verify DeviceNet Safety configuration
9-1–9-7
verify FAILED 9-5
verify failed 9-3
verify not supported 9-3
view scanner response times 5-13
W
Watchdog Timeout 5-13
welcome page 9-1