Safety Scanner for GuardPLC Controllers User Manual

Publication 1753-UM002A-EN-P - July 2005
4 Index
S
S#ee 10-4
safety concept 1-1
safety configuration tab 5-2
safety connections 1-7
colorization 1-4
safety connections tab 5-3
safety data
communication
1-3
safety data, signal connections dialog
8-2
Safety Device Verification Wizard 3-5
definition 9-1
device status 9-1
reports 9-5
run 9-1
safety-lock
select devices
9-3
summary 9-7
upload and compare 9-4
Welcome page 9-1
safety I/O
definition
G-2
safety information 2-1
safety integrity level 1-4, 2-7
safety network number 1-1, 4-1
assignment 4-2–4-3
automatic 4-2
automatic assignment 4-2
copy 4-2
definition G-2
formats 4-1
managing 4-1
manual 4-2, 4-3
manual assignment 4-3
mismatch 4-5
mismatch dialog 4-5
reset 3-4, 4-6
time-based 4-1
safety network number error
icon
9-2
safety reset 3-4
when faulted 10-3
safety-lock
devices
during reset
3-5
icon 9-2
save and compile logic 8-4
scanlist 5-8, 5-9
definition G-3
scanner
DeviceNet connections
2-6
features 1-7
ground 2-4
hardware overview 1-6
HSP connections 2-7
mounting 2-2
power supply 2-5
reset 4-6
scanner configuration signature 1-2
scanner ID 5-12
definition G-3
scanner receive timeout 5-13
scanner signals file 1-5, 6-4, 7-1
definition G-3
import 7-5
save 7-4
signal
create
8-2
signal editor 8-2
signals
connect
8-1
connect safety 8-2
define 8-1–8-2
export 7-4
import 7-5
safety data 8-1
SIL
See safety integrity level.
software revision
RSLogix Guard PLUS
1-6
RSNetWorx for DeviceNet 1-6
software revisions
RSLinx
3-1
SRS
See controller ID.
standard connection
1-7
standard connections
colorization
1-4
standard data
communication
1-2
statistics button 5-13
status
A#xx
10-2
bus off detected 10-3
display 10-2
duplicate node failure 10-2
E#ee 10-4
extended error code 10-4
faulted, must issue safety reset 10-3
G#gg 10-4
IDLE
10-2
LEDs 10-1
monitoring 10-1