Safety Scanner for GuardPLC Controllers User Manual

Publication 1753-UM002A-EN-P - July 2005
Index 3
L
LED indicators 10-1
lock
See safety-lock.
login screen
8-4
M
MAC address 6-5
reset 3-4
Max Scanner Response Time 5-13
max scanner response time 5-13
mean time between failures (MTBF)
definition
P-3
mean time to restoration
definition
P-3
mismatch
configuration signature
9-2
SNN 4-5
missing device
icon
9-2
module tab 5-6
mount the scanner 2-2
DIN rail 2-3
panel 2-4
multicast connections 5-4
N
N#xx 10-3
naming convention 1-5
network delay multiplier 5-5
network status LED
flashing
4-4
no network power 10-3
node
definition
G-2
node address
changes
4-6
DeviceNet Safety I/O 3-2
select 1-10
node commissioning 3-2–3-3
node commissioning tool 3-2
O
online button 7-6
output connection owners
reset
3-4
output tab 5-11
P
parameters tab 5-3
password 1-2
forgotten 3-6
protected operations 3-5
reset 3-4, 3-6
set or change 3-5
valid characters 3-6
point-to-point 5-4
poll messages 1-2
poll ratio 5-7
polled
definition
G-2
power supply 2-5
probability of failure on demand (PFD)
definition
P-3
probability of failure per hour (PFH)
definition
P-3
protective debris strip 2-2
R
ready to be safety locked 9-5
ready to be verified 9-3
requested packet interval
and connection reaction time limit
5-5
definition G-2
set 5-4
reset
configuration owner
3-4
reset safety attributes 3-4
reset safety device 3-4, 4-6
RPI
See requested packet interval.
RSLinx
3-1
revision level 1-6
RSLogix Guard PLUS
create a project
6-1
install 1-6
RSLogix Guard PLUS, Hardware
Management
revision level
1-6
RSLogix Guard PLUS, Program
Management
revision level
1-6
RSNetWorx for DeviceNet 1-5
install 1-6
node commissioning 3-2
revision level 1-6
RUN status 10-2