Installation Instructions User guide

6 1747-SDN DeviceNet Scanner Module
Publication 1747-IN058F-EN-P - December 2010
Pass-through
The SLC 500 pass-through feature allows communication with the DeviceNet network from
another network. This feature can be used to adjust and fine tune the nodes on your network.
The pass-through feature is not intended to replace a 1770-KFD, 1784-PCD, 1784-PCID, or
1784-PCIDS connection to the network.
To use the pass-through feature you must meet the following hardware, software and
firmware requirements.
U2DN module
The pass-through feature is not intended to replace a 1784-U2DN, 1770-KFD, 1784-PCD,
1784-PCID, or 1784-PCIDS connection to the network.
Pass-through Requirements
SLC 500 Processor 1747-SDN Firmware RSLinx Software M0 and M1 Files
SLC 5/03 or later 4.015…5.001 2.10 or later Configured for 361 words
SLC 5/03 or later 6.001 or later 2.31 or later Configured for 395 words