Installation Instructions Owner manual

4 SLC ControlNet Scanner Module
Publication 1747-IN059C-EN-P - September 2001
Prevent Electrostatic Discharge
The scanner module is sensitive to electrostatic discharge.
Compliance to European Union Directives
If this product has the CE mark, it is approved for installation within
the European and EEA regions. It has been designed and tested to
meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
• EN 50081-2 EMC — Generic Emission Standard, Part 2 —
Industrial Environment
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
Industrial Environment
This product is intended for use in an industrial environment.
ATTENTION
ÿ
Electrostatic discharge can damage integrated circuits or
semiconductors if you touch backplane connector pins.
Follow these guidelines when you handle the module:
• touch a grounded object to discharge static potential
• wear an approved wrist-strap grounding device
• do not touch the backplane connector or connector
pins
• do not touch circuit components inside the module
• if available, use a static-safe work station
• when not in use, keep the module in its static-shield
bag