Hardware Style Owner's manual

Chapter 7
Maintaining Your Control System
7–6
If it becomes necessary to replace the retainer clip (also called self–locking
tab), order Catalog Number 1746–R15 (4 clips per package).
Retainer Clip
Holding Tabs
Removing Damaged Retainer Clips
If necessary, pry off the broken retainer clip from the bottom with a
screwdriver. Do not twist it off. You can damage the module.
Retainer Clip
Installing New Retainer Clips
Insert one of the pins of the retainer clip into the hole in the I/O module and
then snap the other end in place.
Replacing Retainer Clips on
an I/O Module