USER MANUAL User Manual

C-4 DF1 Diagnostic Command Support

1747-5.34 - June 1998

Table C.8: Reply Values

Diagnostic Counter Reset

This command resets the diagnostic counters listed above.

Table C.9: Command Format

Data Byte Description Status Reply

1 Mode/Status Byte 00 (No Modes)

Interface/Processor Type

Bits 0 – 3: Interface type

(E = Extended)

Bits 4 – 7: Processor type

(F = Computer)

FE (Extended)

3 Extended Interface Type 5F (KFC15) 60 (KFCD15)

4 On-line/Off-line Mode 0 = on-line; 1 = off-line

Series/Revision

Bits 0–4:

Bits 5–7:

0 = Revision A

1 = Revision B, etc.

0 = Series A

1 = Series B, etc.

6 – 16

Bulletin Name =

ASCII

“1770-KFC15 ”

“1770-KFCD15 ”

17 – 24 Reserved for factory use only Values may vary

1 byte 1 byte 2 bytes 1 byte

CMD

STS TNS

FNC