USER MANUAL User Manual

1747-5.34 - June 1998
Appendix B
Cabling and Pinouts
This appendix contains the pinout and wiring information required if
you need to construct cables before installing the KFC15 to a host
device.
Cabling and Pinouts for RS-232C Connection
The KFC15 RS-232C connector is a DB-9 male with the following
EIA standard pinout:
Signal I/O Pin
GND Chassis ground . Housing
TXD Transmitted data O 3
RXD Received data I 2
RTS Request to send O 7
CTS Clear to send I 8
DSR Data set ready I 6
COM Signal common . 5
DCD Data carrier detect I 1
DTR Data terminal ready O 4