User Manual

1 Publication 1747-UM005B-EN-P - March 2006

Chapter

Application Examples

This chapter contains the following application examples.

• Basic configuration example using the backplane

• Supplementary examples using the backplane

• RSLinx software to SLC network via modem example

Basic Configuration

Example Using the

Backplane

This example demonstrates configuration of the interface module

using the backplane.

Parameter Locations

In this application, the configuration parameters are in the data file

N10.

Parameter Locations

IMPORTANT

Before you begin this application, insure that the

JW4 jumper is in vertical Run mode (module

configuration ID=3509).

Address0123456 789

N10:00 0 0 0 0 0 0 0 0 0 0

N10:10 DF1 port configuration parameters

N10:20 DH485 port configuration parameters

N10:30 Modem Init String characters 1...14

N10:40 Modem Init String characters 15...28