User Manual

Publication 1747-UM010B-EN-P - September 2003
2 Index
H
High-speed serial link 1-4
high-speed serial link 1-1, 1-22, 4-1
status bit 6-2, 6-4
hold last state 5-19
I
I/O image data 1-3
Inhibit 1-4
Input file 1-5
input image data 5-1
input image file 1-5
input signal update time 8-2
internal watchdog timeout 8-5
L
LEDs 1-18, 3-9
Local expansion chassis 1-5
local serial link 1-1
local SLC chassis
definition
1-5
local status link 1-23
status bit 6-2, 6-4
logical device 1-4
definition 1-5
logical device address 5-4
G file 5-30
logical group 1-4
definition 1-5
logical groups 5-2
configuration 5-6
I/O image files 5-1
logical image size
RIO configuration
5-4
logical rack
definition
1-5
logical racks 1-4
configuration 5-6
crossing 5-12
I/O image file 5-2
I/O image files 5-1
logical slot
definition
1-5
logical specifications 1-10
Logical words 5-2
logical words
I/O image files
5-1
M
M files 1-5
M0 and M1 data files
capturing M0-M1 file data
B-7
minimizing the scan time B-6
specialty I/O modules with retentive
memory
B-8
M0 file 6-5, 7-6
M0 files 5-14
M1 file 6-5, 7-3
M1 files 5-14
Message instructions 9-21
module address switch 1-20, 3-3
module ID number 5-33
module status word 4-7, 6-4, 6-9, 6-14
definition 1-5
N
Noise immunity A-1
O
Operating temperature A-1
output delay time A-14
output file
definition
1-6
output image file 1-5
P
physical specifications 1-10
PID instructions 9-21
primary chassis 1-11
primary device
input image
5-9
primary mode 5-4, 6-4, 6-5
primary module 1-1
primary system 1-22, 6-5, 6-6
primary system bit 6-3
processor fault 6-5
processor fault bit 6-3
R
receiver program 4-7
remote chassis
definition
1-6
remote expansion chassis
definition
1-6
remote I/O link bit 6-2