User Manual
Publication 1747-UM010B-EN-P - September 2003
Index
Numerics
1/2-slot addressing 1-14, 5-32
1-slot addressing 1-13, 5-32
2-slot addressing 1-12, 5-32, 7-8
A
access-point address 4-5
active device status 5-26
Adapter 1-3
Adapter image 1-3
adapter image 1-4
Advanced Setup menu 2-3
Agency certification A-1
ASB module 1-3
ASB module chassis 1-3
asynchronized data transfer 4-8
automatic transfer 4-1
B
backplane communication 4-3
Backplane current consumption A-1
backplane power requirements 1-3
baud rate 3-1
Baud rate selection A-2
baud rate settings 1-20, 3-3
Block transfer 1-3
block transfer 1-10, 1-17, 4-2, 7-1
throughput A-12
block transfer buffer layout 7-3
block transfer buffers 7-6
Block Transfer instructions 9-20
block transfer modules 1-15
Block transfer read 1-3
block transfer read 7-1, 7-2, 7-3
Block transfer write 1-3
block transfer write 7-1, 7-2, 7-4
C
cable length maximum A-2
capturing M0-M1 file data B-7
carrier detect circuit 8-7
communications attempted status bit
5-23
compatible devices 1-10
complementary chassis 1-11
complementary device
input image
5-10
Complementary I/O 1-3
complementary I/O 1-10, 1-12, 5-6
configuration DIP switch 2-2, 3-3
configuring complementary I/O 1-12
control file 5-14
Counter instructions 9-19
current
reserve capacity
3-4
D
data block counters 6-15
Data Highway Plus. See DH+.
data table transfer time
8-3
data transfer 1-23
Data transfer control word 1-4
data transfer control word 4-7, 6-5, 6-6
Data transfer handshake word 1-4
data transfer handshake word 4-7, 6-6,
6-8
Data transfer status word 1-4
data transfer status word 4-7, 6-6, 6-7
definitions 1-3
device fault status 5-17, 5-27
device inhibit 5-16
device reset 5-16
device reset words 5-20
DH+ communication
bit
6-4
DH+ smart switch 8-4
DH+ switching 8-1, 8-4
Diagnostic instructions 9-19
dip switch settings 1-19
Discrete I/O 1-3
Discrete I/O module 1-3
discrete I/O transfer 1-4
E
enabled device fault status bit 5-23
Extended node capability A-2, 1-4
extended node capability 1-10
F
FIFO instructions 9-20
File Copy instructions 9-19
G
G file 5-3, 5-6, 5-9, 5-24, 1-4
configuration considerations 5-12