User Manual

Publication 1747-UM010B-EN-P - September 2003
Module Control and Status Word 6-13
Switch Assemblies Status
Word
The Switch Assemblies Status Word (SASW) shows the switch
assemblies configuration status for both the six-position (SW1) and the
four-position (SW2) dip switch. Bits 0 through 3 show the
four-position dip switch status, while bits 8 through 13 show the
six-position dip switch status.
Switch Assemblies Status Word
The six-position dip switch is used to configure the communication
channel and other miscellaneous information. The switches have the
following definition:
• SW-1.1 and SW-1.2: Define the communication channel baud
rate as shown below.
• SW-1.3: When ON means that the channel is configured as DH+.
When OFF means that the channel is configured as RIO.
• SW-1.4: User identification SW. This switch can be used to
differentiate one 1747-BSN from its counterpart and identify
when a switchover occurs. This switch is user-configurable and
does not affect the operation of the module.
• SW-1.5: Reserved
000000000000000
14
0
15 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SW-2.1
SW-2.2
SW-2.3
SW-2.4
Reserved
Reserved
Reserved
Reserved
SW-1.1
SW-1.2
SW-1.3
SW-1.4
SW-1.5
SW-1.6
Reserved
Reserved
4-position dip switch
status
6-position dip switch
status
SASW (M1:s.3402)
SW-1.1 SW-1.2 Baud Rate (KBaud)
1 1 57.6
1 0 115.2
0 1 230.4
0 0 Disabled