User Manual

38 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
38 Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application
3. Enter a name for the device.
Note that the following values are used in this example.
4. Click Change... on the General tab.
On the Module Definition screen, configure data type as INT,
Input Size = 72 (INTs), Output Size = 72 (INTs). The Input Size should
match the total size of all three Input Chunks. The Output Size should
Field Value
Name TEST_1746BASB
Revision 2.1
Electronic Keying Compatible Module (default)
Connections Exclusive Owner – Advanced (default)