User Manual

Rockwell Automation Publication 1747-UM076C-EN-E - January 2013 31
Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application 31
3. The New Module dialog opens. Configure your 1756-EN2TR
EtherNet/IP Bridge module. You can configure the bridge module
through the different tabs available.
4. Enter values for Name, IP Address, Slot, Electronic Keying, and Revision,
noting that we used the following values:
5. Click OK to accept the configuration.
Add the Adapter to the I/O
Configuration
Next, you must add the 1747-AENTR adapter as a child of the local
1756-EN2TR module.
1. In the Project dialog, right-click the local 1756-EN2TR module under the
I/O Configuration folder, and select New Module.
Name EN2TR
IP Address 10.88.70.4
Slot 3
Electronic Keying Compatible Module
Revision 3.1