User Manual

4 SLC 500™ 32-Channel Digital I/O Modules
Publication 1746-IN028A-EN-P - October 2003
Overview
In addition to providing the module’s electrical specifications, this document tells
you how to:
• install the module into the chassis
• install the Octal Filter Label
• wire the module
We assume you have already installed your chassis and power supply. If not, please
refer to the installation instructions for these products before preceding.
Installation of Your I/O Module
ATTENTION
!
Never install, remove, or wire modules with power applied to
the chassis.
IMPORTANT
The first slot of the chassis is reserved for the processor or
Remote I/O module Catalog Number 1747-ASB for a remote
chassis.