User Manual

SLC 500™ 32-Channel Digital I/O Modules 13
Publication 1746-IN028A-EN-P - October 2003
Labeling for the 1492 Interface Module
Several different stick-on label sets are provided on a single card with 1492
Interface Modules. Each label set is identified with an I/O module catalog number
and words “upper” and “lower” to identify which terminal strip the label should be
affixed to.
The table on the following page identifies 32-point labels (SLC = decimal
addressing, PLC = octal addressing) and their location on the interface module. Peel
off the appropriate label for your 32-point module and apply it to the interface
module. The following is an example for the 1746-IV32 module.
Catalog No. Voltage Drop at 30°C Voltage Drop at 60° C
Series C Cables V dc and dc come
Wires
(1)
(1) Voltage drop at maximum rated current of 2 amps per conductor.
Output Channel
Wires
(2)
(2) Voltage drop at maximum rated current of 0.5 amps per output channel.
V dc and dc com
Wires
Output Channel
Wires
1492-CABLE005H 127 mv 34 mv 144 mv 38 mv
1492-CABLE10H 173 mv 45 mv 196 mv 51 mv
1492-CABLE25H 334 mv 83 mv 388 mv 95 mv
1492-CABLE50H 574 mv 147 mv 686 mv 169 mv
1492 Interface Module
Bottom
Terminal
Top
Terminal
V1 V1 01 15 V2 V2
V3 V3 16 31 V4 V4
Cable to the 32-Point Module
Example for the 1746-IV32 Module