User Manual Owner's manual

Publication 1746-UM614B-EN-P - September 2007
8 Preface
Additional Resources
The following documents contain information that may be helpful to
you as you use Allen-Bradley SLC products. To obtain a copy of any
of the Allen-Bradley documents listed, contact your local
Allen-Bradley office or distributor.
Common Techniques Used
in this Manual
The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not
procedural steps.
• Numbered lists provide sequential steps or hierarchical
information.
• Text in this font indicates words or phrases you should type.
Resource Description
SLC 500 Systems Selection Guide, publication 1747-SG001
An overview of the SLC 500 family of products
SLC 500 Module Hardware Style User Manual, publication
1747-UM011
A description on how to install and use your modular SLC 500
programmable controller
Installation & Operation Manual for Fixed Hardware Style
Programmable Controllers, publication 1747-6.21
A description on how to install and use your fixed SLC 500
programmable controller
SLC 500 Instruction Set Reference Manual, publication
1747-RM001
A reference manual that contains status file data, instruction set,
and troubleshooting information about the software
SLC 500 4-Channel Analog I/O Modules User’s Manual, publication
1746-UM005
A resource manual and user’s guide containing information about
the analog modules used in your SLC 500 system.
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
In-depth information on grounding and wiring Allen-Bradley
programmable controllers
Application Considerations for Solid-State Controls. publication
SGI-1.1
A description of important differences between solid-state
programmable controller products and hard-wired
electromechanical devices
National Electrical Code, published by the National Fire Protection
Association of Boston, MA
An article on wire sizes and types for grounding electrical
equipment