User Manual Owner's manual

Publication 1746-UM614B-EN-P - September 2007
60 Ladder Programming Examples
Program
] [
COP
COPY FILE
Source #N10:0
Dest #O:3.0
Length
4
S:1
15
] [
0
B3
0
I:1.0
MOVE
Source N10:4
Dest
O:3.2
MOV
[OSR]
B3
1
]/[
MOVE
Source N10:2
Dest
O:3.2
MOV
0
I:1.0
[OSR]
END
Rung 2:0
Set up all four channels
Set channel 2 to CJC
Set channel 2 back to Type K
Rung 2:1
Rung 2:2
Rung 2:3
IMPORTANT
While the module changes the channel configuration, it does
not monitor inputs to any channel.
For the delay in reading inputs, refer to Channel Cut-off
Frequency, Update Time, and Step Response in Chapter 4.