User Manual Owner's manual

Publication 1746-UM614B-EN-P - September 2007

48 Channel Configuration, Data, and Status

9, 10 Unused Unused 00 These bits must be zero for a

valid configuration.

11 Chnl

Enable

Channel Off

0 Disable unused channels for

faster response. When set, the

module configures the channel and

reads the channel input before

setting bit 11 in the status word. If

you change the configuration word,

the status word must reflect the

change before new data is valid. If

you clear the configuration word, the

module clears channel and status

words. For a new configuration word,

channel data and status words

remain cleared until the module sets

this bit (11) in the status word.

Channel On

12…15 Unused Unused 0000 These bits must be zero for a

valid configuration.

Enter Your Bit Selections >>

0000 Selected Configuration Word

Channel Configuration Word (O:e.0 through O:e.3) — Bit Descriptions (Continued)

Bit or

Bits

Define To Select Set these bits in the Channel Configuration Word Description

15…1211109876543210