User guide

Publication 1746-UM006B-EN-P - August 2005
Index 3
input data file worksheets D-5
output and M0 files worksheets D-1
rate counter overflow 4-17
rate measurement 2-11, 4-21, 4-43
rate measurement overflow 4-18, 4-39
rate mode 1-3, 2-19, 6-1, 6-18
rate period 4-11
count 4-21, 4-42
rate period for sequencer mode 4-33
rate valid 4-17, 4-38
related documentation P-3
reset input 4-19, 4-41
reset mode 4-28
reset value (sequencer) linear counters
only
4-35
S
sequence done 4-40
sequencer mode 1-4, 2-21, 4-31, 6-27
input data file worksheet E-4
output and M0 file worksheets E-1
sequencer reset 4-26
setup and control word
counter hold
4-5, 4-27
counter mode 4-31
counter type 4-9
enable outputs 4-4, 4-26
function control 4-8, 4-30
input type 4-7, 4-29
operating mode 4-9, 4-31
reset mode 4-6, 4-28
sequencer test 4-26
soft reset 4-6, 4-27
up/down count direction 4-5, 4-27
soft reset 4-6, 4-27
specifications
general
A-1
inputs A, B, and Z A-1
limit switch A-2
outputs A-2
timing A-2
starting/ending range values 4-12
status word
bit 10, critical error
4-40
bit 10, nonrecoverable application error
4-18
bit 11, configuration error 4-19, 4-41
bit 12, reset input 4-19, 4-41
bit 13, overflow/underflow 4-20, 4-41
bit 2, zero rate period count 4-16, 4-38
bit 3, rate valid 4-17, 4-38
bit 4, rate counter overflow 4-17
bit 5, rate measurement overflow 4-18,
4-39
bit 6, sequence done 4-40
bits 14 and 15
pulse counter state
4-42
bits 14 and 15, pulse counter state 4-20
step 1 thru step 24 outputs 4-33
step 1 thru step 24 presets 4-34
SW1 3-2
settings 3-3
SW2 3-2
settings 3-3
T
terminal block
removal
3-9
wiring 3-10
U
up/down count direction 4-5, 4-27
up/down pulse inputs 2-6
V
valid ranges for range and rate modes
4-10
valid steps for sequencer mode 4-31
W
who should use this manual P-1
wiring 3-6
input and output 3-7
limit switch 3-15
worksheets
range/rate mode
D-1, D-5
sequencer mode E-1, E-4
Z
zero rate period count 4-16, 4-38