User guide

Publication 1746-UM006B-EN-P - August 2005
D-2 Range/Rate Mode Configuration Worksheets
Setup and Control Word (page 4-4)
Valid Ranges (page 4-10)
ATTENTION
The module will fault on power-up if you do not
enter a value.
Counter Type (page 4-9)
Function Control (page 4-8)
Soft Reset (page 4-6)
Counter Hold (page 4-5)
Operating Mode (page 4-9)
Input Type (page 4-7)
Reset Mode (page 4-6)
Up/Down Count Direction (page 4-5)
Enable Outputs (page 4-4)
ATTENTION
The module will fault on power-up if you do not
enter a value.
M0:e.2
76543210Bit Number (decimal) 15 14 13 12 11 10 9 8
7654321Range Number 12 11 10 9 8
Valid Range
1 = range is valid. At least one range must be valid.
RRRR