User guide

1 Publication 1746-UM006B-EN-P - August 2005

Appendix

Range/Rate Mode Configuration Worksheets

Shown below is the Range/Rate Mode Configuration Worksheet for

the Output and M0 File.

Output and M0 File

Worksheets

Direct Outputs (page 4-15)

Output Source Select (page 4-3)

ATTENTION

The module will fault on power-up if you do not

enter values for the Setup and Control Word, Valid

Ranges, Rate Period, and Reset Value/Maximum

Count Value.

RRRRRRRR

O:e.0

Direct Outputs

1 = output ON if under processor control

76543210

Bit Number (decimal)

Output

Number

15 14 13 12 11 10 9 8

Bits 0 thru 3 relate to Physical Outputs

Bits 4 thru 7 relate to Soft Outputs

M0:e.0

76543210Bit Number (decimal) 15 14 13 12 11 10 9 8

1 = processor 0 = module

Output Source Select

RRRRRRRR

Bits 0 thru 3 relate to Physical Outputs

Bits 4 thru 7 relate to Soft Outputs