Owner's manual

1 Publication 1746-RM001A-US-P
Chapter 10
Clock/Calendar Functions
This chapter describes and illustrates commands that set and display the real time
clock/calendar within the BASIC program or from the command line. Table 10.1
lists the corresponding mnemonics.
CALL 40 – Set Clock/
Calendar Time
Purpose
Use CALL 40 to set the following clock/calendar time functions:
• H - hours (0 to 23; only a 24-hour clock is available)
• M - minutes (0 to 59)
• S - seconds (0 to 59)
Syntax
PUSH [hours]
PUSH [minutes]
PUSH [seconds]
CALL 40
Table 10.1 Chapter Reference Guide
If you need (to) Use this mnemonic Page
Set the clock/calendar time (hour, minute, second). CALL 40 10-1
Set the clock/calendar date (day, month, year). CALL 41 10-2
Set the clock/calendar - day of week. CALL 42 10-3
Retrieve a date/time string. CALL 43 10-4
Retrieve the date numeric (day, month, year). CALL 44 10-4
Retrieve a time string. CALL 45 10-5
Retrieve a time numeric. CALL 46 10-6
Retrieve the day of week string. CALL 47 10-6
Retrieve the day of week numeri
c.
CALL 48 10-7
Retrieve a date string. CALL 52 10-7