User Manual

SLC 500™ Modular Chassis 9
Publication 1746-IN016C-MU-P - December 2003
Ground Your Chassis
Verify Grounding Configuration
This figure shows you how to run ground connections from the chassis to the
ground bus. Use a ground bus because it reduces the electrical resistance at the
connection.
To properly ground your I/O chassis: See page:
verify grounding configuration 9
install a central ground bus 10
connect equipment grounding conductor 10
connect equipment grounding conductor to ground bus 11
connect ground bus to grounding-electrode system 11
TIP
(1) Keep wire length as short as possible.
(1)
(1)
(1)
2 mm
2
(14 AWG)
Functional
Ground
5.2 mm
2
(10 AWG)
Preferred Grounding Method.
2 mm
2
(14 AWG)
2 mm
2
(14 AWG)
Nearest Ground Bus