User Manual

Publication 1738-IN001C-EN-E - June 2005
2 ArmorPoint 24V dc Output Modules, Series A
.
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication
SGI-1.1 available from your local Rockwell Automation sales office or online at
http://literature.rockwellautomation.com) describes some important differences between solid state
equipment and hard-wi red electromechanical devices. Becau se of this difference, and also becau se of the
wide variety of uses for solid state equipment, all persons responsible for applyin g this equipme nt must
satisfy themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Auto mation, Inc. be respo nsible or liable for indirect or conseque ntial damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the
many variables and requirements associated with any particular installation, Rockwell Automation, Inc.
cannot assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell
Automation, In c. is prohibited.
Throughout this manu al we use no tes to make you aware of safety considerations.
WARNING
Identifies information about practices or circumstances that can cause an explosion in a
hazardous environ m en t, which may lead to personal injury or death, proper ty damage,
or economic loss.
IMPORTANT
Identifies information that is critical for successful application and understanding of the
product.
ATTENTION
Identifies information about practices or circumstances that can lead to personal injury or
death, property damage, or economic loss. Attentions help you:
• identify a hazard
• avoid a hazard
• recognize the co nse quence
SHOCK HAZARD
Labels may be located on or inside the equipment to alert people that dangerous voltage
may be present.
BURN HAZARD
Labels may be located on or inside the equi pment to alert people that surfaces may be
dangerous temperatures.