User Manual User guide

iv Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
System Components
We used the following components for the example applications. You will need
the same or similar components to set up your own control system using
ArmorPoint I/O on EtherNet/IP.
System Components
Quantity Product Name Catalog Number
Hardware
1 ArmorPoint I/O EtherNet/IP Adapter 1738-AENT
1 ArmorPoint 24V DC Input Module 1738-IB4M12
ArmorPoint I/O 24V DC Sink Output Module 1738-OB4EM12
1 ArmorPoint I/O Analog Input Current Module 1738-IE2CM12
1 ArmorPoint I/O Analog Output Current Module 1738-OE2CM12
1 DIN Rail 199-DR1 or equivalent
1 ControlLogix chassis 1756-A4, (or 1756-A7,
1756-A13, 1756-A17)
1 ControlLogix power supply 1756-PA72, (or 1756-PB72)
1 L63 Controller 1756-L63
1 ControlLogix EtherNet/IP Bridge Module 1756-ENBT
1 Personal computer that supports RSLogix 5000
software
Any appropriate model running
Windows NT, Windows 2000,
Windows XP or higher
Any appropriate model running
Windows
NT 4.0, Service Pack 6A or
higher
1 Ethernet switch Refer to manufacturer’s
specifications
1 24V DC power supply 1738-EP24DC
Associated media and connectors as needed
Software
1 RSLinx communications software,
V2.56 or later.
9355-WAB, 9355-WABOEM,
9355-WABC
1 RSLogix 5000 programming software,
V17 or higher
9324-RLD300ENE