User Manual User guide

Rockwell Automation Publication 1738-UM005A-EN-P - July 2013 i
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
Who Should Use this
Manual
This manual is intended for control engineers and technicians who are installing,
configuring, maintaining, and troubleshooting an EtherNet/IP control system
that communicates with ArmorPOINT I/O
®
through a 1738-AENT Series B
adapter. You must be able to use RSLogix
®
5000 software to configure your
adapter.
Purpose of This Manual
This manual contains an overview of the ArmorPOINT I/O adapter. It
describes how to install and configure the adapter and provides examples
showing how to use the adapter to communicate with ArmorPOINT I/O
modules over an EtherNet/IP network.
Related Documentation
The following documents contain additional information concerning Rockwell
Automation products. To obtain a copy, contact your local Rockwell Automation
office or distributor.
Resource Description
1738 ArmorPOINT I/O Selection Guide, publication 1738-SG001
A description and overview of the 1738 series adapters, I/O modules, and
compatible control platforms.
EtherNet/IP Performance and Application Guide, publication
ENET-RM002
.
Using EtherNet/IP for Industrial Control.
EtherNet/IP Modules in Logix5000
™ Control Systems User
Manual, publication ENET-UM001
A manual describing how to use EtherNet/IP modules with Logix5000
controllers and communicate with various devices on the Ethernet network.
ControlLogix
®
Chassis and Power Supplies Installation
Instructions, publication 1756-IN005.
Describes how to install and troubleshoot standard and ControlLogix-XT
versions of the 1756 chassis and power supplies, including redundant power
supplies.
ControlLogix
EtherNet/IP Bridge Module Installation Instructions,
publication 1756-IN019
ControlLogix EtherNet/IP Bridge Module installation instructions.
ControlLogix
System User Manual, publication 1756-UM001 Detailed information on how to install, configure and troubleshoot the
ControlLogix Sequence of Events module in your ControlLogix application.
RSLinx
®
Classic Getting Results Guide, publication LINX-GR001 Information on how to install and navigate the RSLinx Classic software. It
explains how to access and navigate the help, and how to effectively use the
RSLinx Classic software.
1738 ArmorPOINT I/O
®
EtherNet/IP Adapter Installation
Instructions, publication 1738-IN030
Installation instructions for installing the 1738 POINT I/O EtherNet/IP Adapter.
Pinout Guide for 1738 ArmorPOINT Adapters and Power Supplies
Wiring Diagram, publication 1738-WD011
Information on wiring 1738 ArmorPOINT I/O EtherNet/IP Series B Adapters and
Power Supplies.