User Manual Instruction Manual

Publication 1734-UM003B-EN-P - August 2005
Index
A
active features per mode 1-10
assembly selection 3-8, 3-11
B
base assembly, mounting 2-1
C
checking I/O defaults 4-6
class instance attribute editor 5-2
class instance editor 5-1
commissioning a node 4-2
compare window on/off values 3-10
configuration data 3-6
configuration software 4-1
connecting an output to a compare window 1-12
connecting outputs to compare windows 3-9
continuous/rate measurement mode 1-2
continuous/rate mode - operation 1-7
counter control 3-5
counter mode 1-2
counter mode operation 1-2
counter type selection 3-6
D
data table - complete format 3-1
decimal position - frequency or counter display 3-7
E
encoder mode 1-2
encoder mode operation 1-3
F
feedback 1-1
filter selection 3-7
filter settings 1-1
format - data table 3-1
G
gate interval setting 3-8
I
indicators 6-1
input status indicator 6-2
input voltage range 1-1
input word - present channel data 3-2
installation
module
2-2
removable terminal block 2-4
wiring base assembly 2-1
K
keyswitch position 2-3
M
modes of operation 1-2
module installation 2-2
module status indicator 6-1
module/channel error bits 3-3
mounting base, removal 2-4
mounting, base assembly 2-1
N
network status indicator 6-2
new data indicator 1-9
node commissioning tool 4-2
node setting (out of box) 4-2
O
operating mode features 1-10
operation
continuous/rate mode
1-7
counter mode 1-2
encoder mode 1-3
pulse width modulation mode 1-8
rate measurement mode 1-8
scalar 1-6
output control 1-12
output data control word 3-5
output status indicator 6-2
output ties 3-9
outputs 1-2