User guide

POINT I/O 5V DC and 24V DC Very High Speed Counter Module 9
Publication 1734-IN003F-EN-E - January 2014
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base clockwise
until the number required for the type of module being installed aligns with the
notch in the base.
2. Make certain the DIN rail locking screw is in the horizontal position. You cannot
insert the module if the locking mechanism is unlocked.
3. Insert the module straight down into the mounting base.
4. Press to secure. The module locks into place.
Turn the keyswitch to align the number
with the notch (position 3 is shown).
44009
Be sure the DIN rail locking screw is
in the horizontal position.
44010
24VDC
S
ource
O
utput
M
odule
Status
Netw
ork
Status
1
734
O
B
4E
NOD
E:
0
1
2
3