User guide

POINT I/O 5V DC and 24V DC Very High Speed Counter Module 23
Publication 1734-IN003F-EN-E - January 2014
Output Specifications
Attribute Value
Number of outputs 1 isolated group of 2 capable of 0.5 A @ 24V DC
Output control Outputs can be tied to any of 4 compare windows
Output supply voltage range 10…28.8V DC
OFF-state leakage current ≤ 0.5 mA
ON-state voltage drop ≤ 0.3V DC @ 0.5 A
ON-state current 0.5 A max, Pilot Duty
Short-circuit current 6 A – Outputs are short-circuit protected and either cycle until you correct
the fault or latch off (depending upon programming). Short circuit is
detected when output turns on.
Open-wire detection Open wire is detected when output is turned off.
Delay time
(1)
OFF to ON
ON to OFF
25 μs (load dependent)
150 μs (load dependent)
(1)
Off–on delay is time from a valid output “on” signal to output energization.
On–off delay is time from a valid output “off” signal to output deenergization.