Installation Instructions

16 POINT I/O 4 Channel Analog Current Output Module
Publication
1734-IN034B-EN-P - November 2010
Network
Status
Off Device is not on-line
- Device has not completed dup_MAC_id test
- Device not powered - check module status indicator
Flashing green Device is on-line but has no connections in the
established state.
Green Device on-line and has connections in the established
state.
Flashing red One or more I/O connections in timed-out state
Red Critical link failure - failed communication device. Device
detected error that prevents it communicating on the
network.
Flashing
red/green
Communication faulted device - the device has detected a
network access error and is in communication faulted
state. Device has received and accepted an Identify
Communication Faulted Request - long protocol message.
Channel
Status
Off Module in CAL mode.
Solid green Channel actively controlling outputs.
Flashing green Channel calibrating.
Flashing red Channel at end of default range (0 mA or 21 mA)
Solid Red No power or major channel fault
Indicator State Description