Instruction Manual

16 POINT I/O 2 Current Output and 2 Voltage Output Analog Modules
Publication
1734-IN002C-EN-E - April 2005
Indication Probable Cause
Module Status
Off No power is applied to device.
Green Device is operating normally.
Flashing Green Device needs commissioning due to configuration missing,
incomplete, or incorrect.
Flashing Red Recoverable fault is present.
Red Unrecoverable fault may require device replacement.
Flashing Red/Green Device is in self-test.
Indication Probable Cause
Network Status
Off Device is not online.
- Device has not completed dup_MAC_id test.
- Device not powered. Check module status indicator.
Flashing Green Device is online but has no connections in the established state.
Green Device is online and has connections in the established state.
Flashing Red One or more I/O connections are in timed-out state
Red Critical link failure is present with failed communication device.
Device detected error that prevents it communicating on the
network.
Flashing
Red/Green
Communication faulted device is present.
The device detected a network access error and is in communication
faulted state.
Device received and accepted an Identify Communication Faulted
Request - long protocol message.