Installation Instructions User Manual

POINT I/O 8 Channel High Density Current Input Modules 9
Publication
1734-IN033B-EN-P - November 2010
Install the I/O Module
The module can be installed before, or after base installation. Make sure that
the mounting base is correctly keyed before installing the module into the
mounting base. In addition, make sure the mounting base locking screw is
positioned horizontal referenced to the base.
1734-TB Base
Be sure the DIN-rail
locking screw is in the
horizontal position.
Turn the keyswitch to align
the number with the notch.
Notch position 3 is shown.
44229
44009