User guide
Table Of Contents
- POINT I/O 2 Current and 2 Voltage Input Analog Modules
- Inside…
- Important User Information
- Environment and Enclosure
- Preventing Electrostatic Discharge
- Before You Begin
- Identify Module Components
- Install the Mounting Base
- Install the Module
- Install the Removable Terminal Block (RTB)
- Remove a Mounting Base
- Communicate with Your Module
- Wire the Module
- Troubleshoot with Indicators
- North American Hazardous Location Approval
- European Hazardous Location Approval
- Specifications
16 POINT I/O 2 Current and 2 Voltage Input Analog Modules
Publication
1734-IN027A-EN-E - May 2005
Indication Probable Cause
Channel Status
Off Module in CAL mode
Solid Green Normal (channel scanning inputs)
Flashing Green Channel being calibrated
Solid Red No power or major channel fault
Flashing Red Channel at end of range (0mA or 21mA) for 1734-IEC2C
Channel at end of range (over or under) for 1734-IE2V