Installation Instructions Instruction Manual

20 1734 POINT I/O Dual Port EtherNet/IP Adapter

Publication 1734-IN041B-EN-P - October 2013

Isolation voltage 50V (continuous), Reinforced Insulation Type, between

all circuits

Type tested @ 500V AC for 60 s

Field power supply 10...28.8V DC @ 10A

Field power output 10...28.8V DC @ 9A

Module input 10...28V DC @ 1000 mA

POINTBus output, max 5V DC @ 0.8A

Dimensions (HxWxD), approx. 76.2 x 73.0 x 133.4 mm (3.0 x 2.87 x 5.25 in.)

Enclosure type rating None (open-style)

Terminal base screw torque 0.8 Nm (7 lb-in)

Weight, approx. 0.28 Kg (0.62 lb)

Wiring category

(1)

1 – on power ports

1 – on communications ports

Wire Size Power connections:

0.34... 2.1 mm

(22...14 AWG) solid or stranded copper wire rated

@ 75 °C (167 °F ) or greater, 1.2 mm (3/64 in.) insulation max or

°C (194 °F ) for ControlLogix.

Ethernet wiring:

RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e

min cable according to TIA 568-B.1 or Category 5 cable according

to ISO/IEC 24702.

North American temp code T4

IEC Temp Code T4

(1)

Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and

Grounding Guidelines, publication 1770-IN041.

General Specifications

Attribute Value