Configuration User Manual

Rockwell Automation Publication ENET-UM001L-EN-P - March 2014 51
Control I/O Chapter 5
The Module Properties dialog box appears.
3. In the Name field, type the name of your I/O module.
4. In the Slot field, type the slot number in which your I/O module will
reside.
5. From the Comm Format pull-down menu, choose a communication
format.
For more information on the selection of communication formats, see
Set
the Requested Packet Interval (RPI) on page 58.
6. Click OK to see the rest of the Module Properties dialog box.
7. Configure the module as necessary.
Use the Help button to view module-specific configuration information.
8. Click Finish.