Configuration User Manual

148 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Index
M
map tags 84
messaging
configuring 79, 82
connections 74
guidelines
73
logic
75
data transfer
logic 78
mapping tags 84
overview
61, 86
to PLC-5 or SLCcontroller
83
MSG instruction
configuring 79, 82
connections
74
guidelines
73
logic 75, 78
mapping tags 84
sending email 94
sending via an email 89-95
to PLC-5 or SLC controllers 83
N
network address
DNS addressing 31-32
set IP network address 18
network overview
modules in an EtherNet/IP control system 11
network parameters
DNS addressing 18
domain name 18
gateway 17
host name 18
IP addresses 17
subnet mask 17
O
ownership 56
listen-only connection 56
owner controller 56
P
PanelView terminals
adding in Studio 5000 environment 101-104
communicating with Logix5000 controller
over an EtherNet/IP network 99-
106
determining connections 100
organizing controller data 105
set up hardware 99
personal computers
placing on network 13-15
PLC-5 controller 83
produce tags 64, 66, 67
produced and consumed tags
connections 64
consume tags
68, 72
organize tags
63
overview 61, 86
produce tags
66, 67
set up hardware
62
terminology 64
R
rack-optimized connection 52
remote adapter 57
requested packet interval 58, 59
ring supervisor
configure with Studio 5000 environment 37
enable in Studio 5000 environment 40
RPI 58
RSLinx software
communication driver 14-15
configuring network parameters 25-27
setting IP network address 18
S
select a remote adapter 57
set IP network address 18
BOOTP/DHCP server 21-23
RSLinx software or RSLogix 5000 software 18
thumbwheel switch 18
set the requested packet interval
with Studio 5000 environment 58, 59
set up hardware
data transfer 62
I/O modules over EtherNet/IP 47
interlocking 62
messaging 62
PanelView terminals and Logix5000
controllers 99
produced and consumed tags 62
set up I/O
controlling I/O 47
SLC controller 83
status codes
email 96
string tags 89
Studio 5000 environment
adding a PanelView terminal 101-104
adding distributed I/O modules 48, 60
configure a ring supervisor 37
consume a tag 68, 72
enable ring supervisor 40
produce a tag 66, 67
set the requested packet interval 58, 59
setting IP network address 18
software
adding distributed I/O modules 51
verify supervisor configuration 46