User Manual Manual

Publication 1734-UM008B-EN-P - August 2005
4-24 Configure the Adapter
ACNR:3:I (1734-IE2V module) input data
ACNR:I or ACNR:O (rack optimized inputs/outputs)
Use the controller tags in your ladder program to read input data or
write output data.
For RSLogix5000 programming instructions, refer to RSLogix
5000 Configuration and Programming for the Logix5000 Family
of Controllers, publication no. RLD300GR.
For ControlLogix controller information, refer to ControlLogix
System User Manual, publication 1756-UM001.
Slot Status Bits
The Slot Status bits display the connection status for each of the
POINT I/O modules that use a rack optimized connection.
Bit 0 corresponds to the rack optimized connection in the
1734-ACNR slot 0.
Each of the other bits (1-64) correspond to a POINT I/O module
that may be installed in the POINT I/O backplane.